PDA

Просмотр полной версии : Птица Angry Bird Egg от RC-PROJECT.COM обзор/сборка/настройка



Shooter
14.04.2020, 10:56
Всем привет.
В данном обзоре я покажу процесс правильной сборки и настройки увлекательной птицы Angry Bird Egg от rc-project.com

В продаже имеется два вида кит наборов:
1. Кит набор с контроллером махов крыльев.
2. Супер комбо набор с необходимой электроникой.

Я использую второй вариант. Такой: Only the registered members can see the link

Необходимо покупать супер комбо набор который комплектуется подобраной производителем электроникой или использовать
только ту электронику которую рекомендует производитель. В противном случаи ваша модель не будет летать должным образом!

Контроллер для махов крыльев в комплекте такой: Only the registered members can see the link

Для полноценной сборки, помимо супер комбо набора необходимо также иметь следующие комплектующие:
- Радиоуправление мин. 4 канала с функцией микширования и экспонентами.
- Аккумулятор Lipo 3s 11.1в 460mah 50С
- Клей UHU Por
- Клей цианакрилатный с активатором. такой: Only the registered members can see the link
- Лента липучка. такая: Only the registered members can see the link

Данный кит набор я собрал еще в прошлом году, отлетал пол сезона и только сейчас дошли руки разместить обзор на форуме. Собранная птица выглядит так:
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)
Видео полета я выложу в конце этого обзора.

Для сборки нам понадобится кое какой инструмент: нож канцелярский, ножницы, отвертка крестовая.
Также нужен паяльник и термоусадка для того, чтобы припаять разъем и провода двигателя к регулятору хода. Это необходимо сделать в первую очередь. Разумеется, провода двигателя нужно припаять так что бы он вращался в правильную сторону. Я думаю, это понятно и обсуждению не подлежит!

И так, давайте приступим....

Shooter
14.04.2020, 11:26
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

1. Распаковка
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 11:31
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

2. Извлекаем фурнитуру с помощью канцелярского ножа.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

3. На ровном столе устанавливаем подкладку и размещаем фюзеляж для склейки.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 11:36
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


Используя линейку делаем небольшую прорезь для лонжерона на обратной стороне крыла.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 11:42
Прорезь под лонжерон должен быть равный размеру лонжерона, примерно 3 х 3 мм.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


Наносим клей UHU Por на торец крыла в местах склейки двух частей.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 11:48
Соединяем две части крыла и наносим клей в месте установки лонжерона.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


Устанавливаем лонжерон и промазываем его клеем сверху.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 15:31
4. Промазываю клеем клюв и склеиваю с крылом.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


5. Использует супер клей (цианакрилатный) с активатором и устанавливаем кабанчики в крыле. Клеим только на этот клей, так как нам необходимо жесткое вклеивание кабанчика.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 15:53
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


Использую активатор.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 15:56
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 16:06
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

6. Устанавливаю качалку сервопривода в нейтральное положение и устанавливаю сервоприводы в крылья.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


Устанавливаю тягу.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 16:10
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


Фиксирую сервопривод ухупором по периметру.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 16:14
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


7. Устанавливаю вилочки на тяги для крыла.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 16:31
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


8. Наношу клей и устанавливаю нижнюю часть фюзеляжа.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 17:03
Устанавливаю сервопривод махов крыльев с тягами.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


Необходимо проклеить клеем по периметру. Все детали. модели.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


9. Фиксирую тягу махов крыльев на кабанчиках. Делается так: 1. Подключаю сервопривод к приемнику и устанавливаю в нейтральное положение. 2. Устанавливается вилочка в кабанчик. 3. Надевается термоусадка на тягу. 4. Кладу на поверхность модели под тягой лист толстого картона для защиты пенопласта от нагрева. 5. Использую зажигался для фиксации термоусадки.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 17:22
10. Прикручиваю двигатель к мотораме. Винтики использую от сервоприводов. Также устанавливаю воздушный винт который идет в комплекте. Обращаю ваше внимание на то что устанавливается винт по типу «толкающий».

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


11. Наношу клей и устанавливаю мотораму с двигателем. После чего устанавливаю вторую часть фюзеляжа. И
Использую канцелярский угольник для установки угла в 90 градусов.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


12. Наношу клей и устанавливаю заднюю часть модели. Фиксирую булавками до полного высыхания. Разумеется использую клей Уху Пор.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


13. Далее устанавливаю хвост и гребень модели на клей и фиксирую булавками. Также нужно установить сервопривод киля и тягу.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 17:29
14. Фиксирую накладку на глазик по центру суперклеем и проклеиваем Уху Пором по контуру.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Проклеиваю Уху Пором где нужно.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 17:35
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


15. Клею регулятор хода на липучку.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 17:41
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


Фиксирую стяжкой провода при потребности.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


16. Подключаю контроллер махов крыльев. Там подписано что и куда подключать.
Необходимо это сделать через сервоудлинитель 150мм

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 17:48
Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


17. Клею липучку под фиксацию батареи на клюв. Там указано где должна быть батарея.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
14.04.2020, 17:57
18. Подключаю питание и субтримом на передатчике выставляю все рули в ноль. Это делается так как показано на фото.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

19. Укладываю провода таким образом. Обратите внимание на место размещения приемника! Это важно.
Вес моего приемника 5г. Разместить его нужно так как показано на фото. В противном случаи вы нарушите центр тяжести.
Приемники которые весят больше, нужно облегчить и разместить так что бы не нарушить центр тяжести.
Эта модель очень чувствительна к центровке!!!

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
15.04.2020, 07:38
20. Что касается настроек передатчика. Устанавливаем тип крыла на передатчике «летающее крыло»

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

21. Устанавливаем максимальные расходы по элеронам.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

22. По рудеру я установил расход в 115 процентов.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

Shooter
15.04.2020, 08:09
23. В меня «D/R – Expo» по элеронам и высоте я установил расход 125 процентов и экспоненты 45

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)

24. По рудеру расходы 72 и экспонент 50. Так как указано на фото.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


25. Теперь самое важное. Необходимо установить микс так как показано на фото.
Это очень важно. Дело в том что мотоустановка данной модели обладает значительной тягой, которая составляет более 2-х единиц веса модели. По этой причине реактивный момент винта проявляется значительно. Это проявляется тем, что на максимальном газу модель стремится к кабрированию.
Таким образом необходимо установить микс «ручки газа» к «рулю высоты» равный 7%. На фото ниже показано как это должно выглядеть на передатчике Spektrum dx8.
Использования данной настройки позволяет компенсировать все моменты и обеспечить прямолинейный полет модели на любых положениях ручки газа.

Only the registered members can see the link (Only the registered members can see the link)Only the registered members can see the link (Only the registered members can see the link)


26. На этом все. Ваша модель собрана и готова радовать Вас и ваших близких.
Ниже смотрите видео полета данной модели, с правильными настройками, которые я дал в этой тебе.
Если у Вас возникли какие-то трудности в сборке и настройке, пожалуйста напишите это здесь. Вам помогу)


Only the registered members can see the link

Only the registered members can see the link